0 Members and 1 Guest are viewing this topic.
Neal ..If you can install and run cpu-zpost what core 0 and core 1 are clocking at !I suspect this batch clocks at 1.2 G and both cores are running ! ... just guessin though
The model differs slightly as an a20-D according to manufacturer's - I have been hunting this rom image to no avail
HELLYEA! Congrats on breaking the 7000 benchmark barrier here mate!!!
Sometimes the stock processor ramping is wayyyy off on these tablets, and also sometimes AnTuTu doesn't help. It only performs tests in a certain order, and quite often you'll find that running a first test from boot gives WORSE results than a second or subsequenttest. This is because the later tests push the cores, so the ramping kicks in.Then the next test has the optimum core speeds as it begins the test. It's not the most efficient benchmark app
Hey, Thomas - I'm catching you up, buddy!
Nice score, Neal! Mine only benched 9315 on 1152MHz, so on 1056MHz it's not far off yours!