Author Topic: nuclear_evb-eng 4.0.4 IMM76D 20121108  (Read 20015 times)

0 Members and 2 Guests are viewing this topic.

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
nuclear_evb-eng 4.0.4 IMM76D 20121108
« on: December 17, 2012, 03:06:36 AM »
 :android-cry:

tried using uberoid 1.0, wouldn't boot, then 1.1, wouldn't boot.

tried every rom listed in the a13 category, most do not boot. the rest have no wifi, and or no touchscreen support.

I did make a backup of  the original firmware.

i have -
boot.img
bootloader.img
data.tgz
recovery.img
system.tgz


I'm lost as what to do now. If someone could offer guidance, or some assistance, it would be immensly appreciated.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #1 on: December 17, 2012, 03:16:23 AM »
:android-cry:

tried using uberoid 1.0, wouldn't boot, then 1.1, wouldn't boot.

tried every rom listed in the a13 category, most do not boot. the rest have no wifi, and or no touchscreen support.

I did make a backup of  the original firmware.

i have -
boot.img
bootloader.img
data.tgz
recovery.img
system.tgz


I'm lost as what to do now. If someone could offer guidance, or some assistance, it would be immensly appreciated.


then use the uberizer v1.2
take your rom dump files and put them in a folder
copy that folder to
c:\program files\techknowforum.net\uberizer\rom_dumps

you need a tablet that does full boot, with usb debug enabled
working adb connection .. you may have to install the android debug bridge (adb) drivers

after adb has recognized your tablet ... the do a     i         4        which is a A1X rom dump restore

http://www.techknow.t0xic.nl/forum/index.php?topic=4113.0

There is a slight error in
Step # 9

When you get to step 9 it will need manual entry it
should read a follows:

Step 9 Manual input required in the recovery mode:

Step 9.1 Navigate to mount and storage
Step 9.2 Format everything except your sdcard & emmc & extsd
Step 9.3 mount everything except extsd & sdcard

It is only how the text is displayed that is the issue .. .. otherwise it has flawlessly restored my stock rom dump and last backed up dump without issue ..

And remember when the Restore Step 10 is completed .. reboot the tablet using item r in the uberizer menu.
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #2 on: December 17, 2012, 04:02:28 AM »
when it gets to step 9, it keeps going, and errors out.

i attached a screenshot


Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #3 on: December 17, 2012, 04:09:11 AM »
when it gets to step 9, it keeps going, and errors out.

i attached a screenshot

it wont do that .. you hit a key to many times and it stored it and blew right thru that ...i know the pause works because i have done this on my tablet at least 8  times it it never went thru step 9 with out stopping ..it cant boot into recovery because step 6 also failed .. that moves the recovery img from the sd card to the tablet .. if that failed then the tablet cannot boot into recovery .. that is another reason why step 9 will fail ..

i need to see earlier steps .. as i see another failure even before step nine .. and that indicate your are either not rooted or you did not run the uberizer as administrator .. what compute os are you running ??
« Last Edit: December 17, 2012, 04:12:17 AM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #4 on: December 17, 2012, 04:26:54 AM »
windows 7

the device is rooted, with uberizer, and i'm running it as administrator.

here is the earlier steps. there is an error on #3

when i chose i, then 4 it asks for dir:
i hit enter, and it says all the files are okay.
i press a key to continue, and i don't touch the keyboard after that.


p.s. i really appreciate the help

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #5 on: December 17, 2012, 04:31:42 AM »
well ill have to move to another machine .. but ill bet it is a problem with a line in the code .. you are using a 64 bit machine arent you ??????
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #6 on: December 17, 2012, 04:33:39 AM »
yep, 64bit windows 7

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #7 on: December 17, 2012, 04:54:03 AM »
look in the following directory on your computer
1)
c:\program files (x86)\TechKnowForum.net\Uberizer\changer_files
do you see a file called recovery.img?

2)
c:\program files\TechKnowForum.net\Uberizer\changer_files
do you see a file called recovery.img??
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #8 on: December 17, 2012, 05:00:01 AM »
yep among many other files.

C:\Program Files (x86)\TechKnowForum.net\Uberizer\changer_files\recovery.img

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #9 on: December 17, 2012, 05:01:50 AM »
yep among many other files.

C:\Program Files (x86)\TechKnowForum.net\Uberizer\changer_files\recovery.img

what about the other one ??????
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #10 on: December 17, 2012, 05:06:42 AM »
oh sorry, i don't have a tech know directory in c:\program files\ , only c:\program files x86\

should it be in both?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #11 on: December 17, 2012, 05:11:55 AM »
oh sorry, i don't have a tech know directory in c:\program files\ , only c:\program files x86\

should it be in both?

thats what i am try to figure out

go ahead and make a directory called
C:\Program Files\TechKnowForum.net\Uberizer\changer_files

then copy that file recovery.img to the directory u just made

then rerun the uberizer and see if Step 3 will now work ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #12 on: December 17, 2012, 05:24:39 AM »
tried your suggestion same result. :(

i used the "check root access" and it came back successful.


if that file is to be copied to the internal or external sd card, can i do that  manually before starting the process?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #13 on: December 17, 2012, 05:33:02 AM »
look on your  internal sd card with a file browser
do you see a directory called     recovery_install ??  Does it have your rom dump images in there?
If the directory is there then take that recovery.img file and copy it to your internal sd card into the recovery_install  folder

then try again ..step 3 will still fail, but step 6 shud now succeed as it is on the sd card ..

« Last Edit: December 17, 2012, 05:35:22 AM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #14 on: December 17, 2012, 05:44:20 AM »
files are in place per your suggestion

step 3 does still fail, step 6 is successful, but it still skips over step 9 and "press any key to continue to step 10"

before pressing a key i did the formatting, and mounting in the CWM.

hitting a key just closed the process.

now it appears the tablet won't boot, i'll livesuit a bootable image, and try again.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #15 on: December 17, 2012, 05:51:17 AM »
files are in place per your suggestion

step 3 does still fail, step 6 is successful, but it still skips over step 9 and "press any key to continue to step 10"

before pressing a key i did the formatting, and mounting in the CWM.

hitting a key just closed the process.

now it appears the tablet won't boot, i'll livesuit a bootable image, and try again.

Step 9  nothing happens .. It is a manual process... it simply tell you to format and mount per the instruction that is all it does it a on screen guide of what you need to do ...then when you are done with the formatting and mounting in CWM then press the key and it copies the img files into your tab while yoiu are still in recovery..
Did you format the emmc?  or did you follow the corrected steps for step 9 that i sent you earlier .. if you formatted the emmc you erased the files thet you needed to flahs !!
« Last Edit: December 17, 2012, 06:11:52 AM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #16 on: December 17, 2012, 03:07:54 PM »
I've followed your steps precisely.

I get into cwm recovery mode now, i format and mount only the ones you specified.

in step 9 i still get the error messages,.
"emmc is not recognized as an internal or external command"
extsd....
sdcard...

but i format cache, data, system.
i then mount, cache, data, system, emmc

while still in the "mounts and storage menu"

i press a key to continue step 10.

the text goes on the screen way to fast to see what it says, and the tablet does nothing. it's still in the "mounts and storage menu" in cwm
« Last Edit: December 17, 2012, 03:17:57 PM by MLKE »

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #17 on: December 17, 2012, 03:30:43 PM »
I tried it again, step 10 says something about not being able to find a file. but it goes too fast for me to see

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #18 on: December 17, 2012, 03:56:50 PM »
I tried it again, step 10 says something about not being able to find a file. but it goes too fast for me to see

"i then mount, cache, data, system, emmc"     This is a problem .. the emmc should already be mounted ....if it isnt then your tablet is handlin recovery different or you actually unmounted instead of mounting !!!!!!!!

Well either you have to try on windows 32 bit machine or your tablet handles the names of the storage differently

get to a point where your are at step 9 and hold there do not proceded to step 10 and do not do any of the cwm actions ..
i ll have to walk u thru what to do ..
ill need you to open an administrative command prompt and then navigate to
c:\program files (x86)\TechKnowforum.net\uberizer
in the command windows run
adb devices
response = 12345678            recovery
adb shell
response : varies but you shud be at adb shell superuser prompt


« Last Edit: December 17, 2012, 04:30:14 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #19 on: December 17, 2012, 04:32:51 PM »
I've followed your steps precisely.

I get into cwm recovery mode now, i format and mount only the ones you specified.

in step 9 i still get the error messages,.
"emmc is not recognized as an internal or external command"
extsd....
sdcard...

but i format cache, data, system.
i then mount, cache, data, system, emmc

while still in the "mounts and storage menu"

i press a key to continue step 10.

the text goes on the screen way to fast to see what it says, and the tablet does nothing. it's still in the "mounts and storage menu" in cwm

in step 9 i still get the error messages,.
"emmc is not recognized as an internal or external command"
extsd....
sdcard...


Did you not read what i sent you?????  This is merely an error in what is displayed...
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #20 on: December 17, 2012, 07:45:54 PM »
sorry i thought you meant something different with your step 9 instructions.

i'm reflashing now, and will try your suggestion.

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #21 on: December 17, 2012, 08:27:16 PM »
alright i'm at step 9

the tablet is in CWM


adb devices
response = 20080411            recovery
adb shell
response : ~#

it looks like i'm in the shell prompt now.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #22 on: December 17, 2012, 08:45:10 PM »
alright i'm at step 9

the tablet is in CWM


adb devices
response = 20080411            recovery
adb shell
response : ~#

it looks like i'm in the shell prompt now.

from the shell ...
send
cd mnt
ls
tell me what mounts there are ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #23 on: December 17, 2012, 08:52:47 PM »
the commands aren't working :(

screenshot attached

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #24 on: December 17, 2012, 09:01:31 PM »
yes they are

 i did not mean for you to type the command send ...

now type in cd emmc
ls

now look for a folder call recovery_install

Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #25 on: December 17, 2012, 09:02:49 PM »
the emmc dir seems to be empty

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #26 on: December 17, 2012, 09:07:27 PM »
now type in

cd ..
ls
cd sdcard
ls

now do you see a recovery_install folder ??
                               
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #27 on: December 17, 2012, 09:11:45 PM »
that folder is empty as well
that's where i created that directory isn't it? and copied the recovery.img

the sd-ext folder shows nothing as well
if i take the external sd card out, and put it in my computer, i have files & folders on it, but none are showing here.


« Last Edit: December 17, 2012, 09:17:09 PM by MLKE »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 317
  • -Received: 4859
  • Posts: 17041
  • Karma: +5324/-57
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #28 on: December 17, 2012, 09:24:11 PM »
that folder is empty as well
that's where i created that directory isn't it? and copied the recovery.img

the sd-ext folder shows nothing as well
if i take the external sd card out, and put it in my computer, i have files & folders on it, but none are showing here.

i dont care about your external sd card .. matter a fact take it out and leave it out .
dont side track here...only do what i tell you

type in cd ..

you shud be back at the  screen that shows bootloader on it ..


Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline MLKE

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 1
  • Posts: 24
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: allwinner a13
Re: nuclear_evb-eng 4.0.4 IMM76D 20121108
« Reply #29 on: December 17, 2012, 09:30:02 PM »
okay,

i'm back at main directory

~#

 

Powered by EzPortal