Author Topic: Flash a custom ROM to my TWD_MID A13 tablet [closed]  (Read 15032 times)

0 Members and 1 Guest are viewing this topic.

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Flash a custom ROM to my TWD_MID A13 tablet [closed]
« on: December 15, 2012, 08:16:20 PM »
I have a TWD_MID A13 7" tablet and I would like to flash a custom ROM on it. Currently I am NOT able to enter fastboot mode.
How can I achieve that?...Otherwise is there any other steps to flash that custom ROM?

Thanks
« Last Edit: July 22, 2013, 01:35:22 AM by twjordo »
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #1 on: December 15, 2012, 08:27:52 PM »
I have a TWD_MID A13 7" tablet and I would like to flash a custom ROM on it. Currently I am able to enter fastboot mode.
How can I achieve that?...Otherwise is there any other steps to flash that custom ROM?

Thanks

Use livesuit for an A13 ... the custom rom shud be in a img format!  Do you have a different rom ??
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #2 on: December 15, 2012, 08:31:13 PM »
I have a TWD_MID A13 7" tablet and I would like to flash a custom ROM on it. Currently I am NOT able to enter fastboot mode.
How can I achieve that?...Otherwise is there any other steps to flash that custom ROM?

Thanks

Use livesuit for an A13 ... the custom rom shud be in a img format!  Do you have a different rom ??

Currently I have 3 .img files... boot.img, bootloader.img and recovery.img along with system and data folders.

Where can I find this livesuit?

--NOTE:  I am NOT able to enter fastboot mode... sorry for mistake, modified my first post
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #3 on: December 15, 2012, 08:38:11 PM »
I have a TWD_MID A13 7" tablet and I would like to flash a custom ROM on it. Currently I am NOT able to enter fastboot mode.
How can I achieve that?...Otherwise is there any other steps to flash that custom ROM?

Thanks

Use livesuit for an A13 ... the custom rom shud be in a img format!  Do you have a different rom ??

Currently I have 3 .img files... boot.img, bootloader.img and recovery.img along with system and data folders.

Where can I find this livesuit?

--NOTE:  I am NOT able to enter fastboot mode... sorry for mistake, modified my first post

well this is not a img file that livesuit can use .. nor is this a true custom rom .. to restore these files you will have to use the uberizer to restore a rom dump .. the system  folder shud be called system.tgz and the data shud be named data.tgz ... if it isnt then uberizer will not work
uberizer requires these  files
bootloader.img
boot.img
recovery.img
system.tgz
data.tgz
let me know if you have these then i can guide you haw to procede


Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #4 on: December 15, 2012, 08:44:53 PM »
Yes I got those files.... I used the A13-ROM-Dump-tool to extract the ROM.
Now I want to flash them back
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #5 on: December 15, 2012, 08:56:46 PM »
Yes I got those files.... I used the A13-ROM-Dump-tool to extract the ROM.
Now I want to flash them back

if all of those files are in their own folder then take that folder and copy it to
c:\program files\techknowforum.net\uberizer\rom_dumps

bring your tablet to a full boot with usb debugging enabled
simply connect your tablet to the computer using a usb cable
start the uberizer
it shud recognize your tablet .. if not then you need to make sure yor computer has the android debug bridge (adb) drivers installed
if your tablet is recognized then do an i  4

please go to the uberizer section and read the corrections to the ste 9 text that is displayed

Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #6 on: December 15, 2012, 09:44:39 PM »
Some thing went wrong... after formating every thing (except SDCARD) and mounting every thing (except extsd).
When I pressed "any key to continue"... it said device not found and aborted.

Now Uberizer doesn't even start... it exits every time it tries to detect the device.

Help !!!  :android-sad:

MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #7 on: December 15, 2012, 09:46:45 PM »
Some thing went wrong... after formating every thing (except SDCARD) and mounting every thing (except extsd).
When I pressed "any key to continue"... it said device not found and aborted.

Now Uberizer doesn't even start... it exits every time it tries to detect the device.

Help !!!  :android-sad:

did you format the emmc ????????
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #8 on: December 15, 2012, 09:48:17 PM »
yes
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #9 on: December 15, 2012, 09:58:04 PM »
yes

well then you didnt do what i told you to do
"please go to the uberizer section and read the corrections to the ste 9 text that is displayed"
this is in the uberizer 1.2 topic ..i hope you are using a new install of 1.2
the files get copied to the sdcard .. when you reboot into recovery ..it becomes the emmc ..
so by formatting emmc  you erased the dump files before they cud get copied into the tablet  ..


There is a slight error in
Step # 9

When you get to step 9 it will need manual entry it
should read a follows:

Step 9 Manual input required in the recovery mode:

Step 9.1 Navigate to mount and storage
Step 9.2 Format everything except your sdcard & emmc & extsd
Step 9.3 mount everything except extsd & sdcard

It is only how the text is displayed that is the issue .. .. otherwise it has flawlessly restored my stock rom dump and last backed up dump without issue ..

And remember when the Restore Step 10 is completed .. reboot the tablet using item r in the uberizer menu.
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #10 on: December 15, 2012, 10:05:53 PM »
yes

well then you didnt do what i told you to do
"please go to the uberizer section and read the corrections to the ste 9 text that is displayed"
this is in the uberizer 1.2 topic ..i hope you are using a new install of 1.2
the files get copied to the sdcard .. when you reboot into recovery ..it becomes the emmc ..
so by formatting emmc  you erased the dump files before they cud get copied into the tablet  ..


There is a slight error in
Step # 9

When you get to step 9 it will need manual entry it
should read a follows:

Step 9 Manual input required in the recovery mode:

Step 9.1 Navigate to mount and storage
Step 9.2 Format everything except your sdcard & emmc & extsd
Step 9.3 mount everything except extsd & sdcard

It is only how the text is displayed that is the issue .. .. otherwise it has flawlessly restored my stock rom dump and last backed up dump without issue ..

And remember when the Restore Step 10 is completed .. reboot the tablet using item r in the uberizer menu.

sorry ...I really didn't recognize that last line... and didn't get what you meant.
Is there anyway to fix that? ... First I need to get Uberizer running again
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #11 on: December 15, 2012, 10:12:54 PM »
no the uberizer is not the problem .. your tablet has absolutely no operating system
when you were in recovery .. you formatted system & data .. so there is nothing there for your tab to boot from
to fix
reflash your tablet with a working rom .. the last rom you had installed before using the uberizer rom dump
all you need is a booting rom and the ability to turn on usb debug if it is not already on

boot the tablet
uberizer shud recognize your tablet agian 
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #12 on: December 15, 2012, 10:16:29 PM »
no the uberizer is not the problem .. your tablet has absolutely no operating system
when you were in recovery .. you formatted system & data .. so there is nothing there for your tab to boot from
to fix
reflash your tablet with a working rom .. the last rom you had installed before using the uberizer rom dump
all you need is a booting rom and the ability to turn on usb debug if it is not already on

boot the tablet
uberizer shud recognize your tablet agian

Now I am at the "mounts and Storage Menu screen"... What to do from there?... should I reboot the device?
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #13 on: December 15, 2012, 10:19:49 PM »
NO NO NO
open a administrative command prompt and navigate to c:\program files\techknowforum.net\uberizer

run the following command

adb devices
your shud get a 12345678          devices

Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #14 on: December 15, 2012, 10:23:23 PM »
No... no device is detected
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #15 on: December 15, 2012, 10:27:31 PM »
okay try this lets see if we can get adb talking to recovery before reflashing the rom

from the admin command prompt type in

adb kill-server
wait for response
adb start-server
wait for the command message that says its running again
then do
adb devices
response is 12345678          device (if in recovery mode it will say recovery instead of device)

if not then you will need to reflash using livesuit or phoenix card and flash a full img file and start over ..
« Last Edit: December 15, 2012, 10:32:07 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #16 on: December 15, 2012, 10:39:34 PM »
Didn't work.... Seems I'll try livesuit or phoenix card.
Which one is the best?
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #17 on: December 15, 2012, 10:42:31 PM »
Didn't work.... Seems I'll try livesuit or phoenix card.
Which one is the best?

depends on what your tablet uses  .. mine i use livesuit v 1.0.9
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #18 on: December 15, 2012, 10:43:43 PM »
mine is A13 tablet... will livesuit work with it?
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #19 on: December 15, 2012, 10:44:42 PM »
mine is A13 tablet... will livesuit work with it?

yes ..livesuit works on a13 and a10
please read this
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #20 on: December 15, 2012, 10:47:40 PM »
mine is A13 tablet... will livesuit work with it?


yes ..livesuit works on a13 and a10
please read this


Well, Ok... I'll give it a try with Livesuit. and start allover again

Thanks
MELFAGER

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #21 on: December 16, 2012, 04:37:02 PM »
satcomranger ... if you are still following this post

Currnetly I've tried using livesuit to flash the firmware image file but it doesn't detect the device.

Also I tried Phoenix card and setup my sdcard, then inserted it and started the device, but I am stuck in a screen with red rectangle... nothing happened.

any help!!!
MELFAGER

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2245
  • Posts: 6868
  • Karma: +2536/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #22 on: December 16, 2012, 04:57:10 PM »
there is a trick to detecting the device with livesuit

plug the device into the cp and have livesuit up and select .img you wish to flash to the device....

some a13's i have had to insetr a pin into the reset hole and hold down the reset button with pin and power device on... your computer should make an initializn sound then another and then livesuit will ask "mandatory force format"  and since you are restoring a corrupt os i would say "yes"
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #23 on: December 16, 2012, 05:10:22 PM »
there is a trick to detecting the device with livesuit

plug the device into the cp and have livesuit up and select .img you wish to flash to the device....

some a13's i have had to insetr a pin into the reset hole and hold down the reset button with pin and power device on... your computer should make an initializn sound then another and then livesuit will ask "mandatory force format"  and since you are restoring a corrupt os i would say "yes"

There is no reset hole in this tablet.
MELFAGER

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2245
  • Posts: 6868
  • Karma: +2536/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #24 on: December 16, 2012, 05:22:40 PM »
 :android-displeased: hmmmm that sux  :android-devil: ....maybe it is the volume + or - and power that initializes it then ????  there has to be a way!!!!!   
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #25 on: December 16, 2012, 05:44:57 PM »
i have to sleep some time melfager

install the drivers
start livesuit and select the full rom image you want to use
plug in usb between computer and tab
hold down vol up
press and hold the power on for 3 to 5 seconds
livesuit shud detect the tablet

if it doesnt then you need  to check windows device manager and look for a yellow triangle
then install manually .. point to the uberizer usb drivers directory to install



Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #26 on: December 16, 2012, 07:18:28 PM »
i have to sleep some time melfager

install the drivers
start livesuit and select the full rom image you want to use
plug in usb between computer and tab
hold down vol up
press and hold the power on for 3 to 5 seconds
livesuit shud detect the tablet

if it doesnt then you need  to check windows device manager and look for a yellow triangle
then install manually .. point to the uberizer usb drivers directory to install


Well... after fixing the drivers as satcom said, live suit now detects my device but it gives me a popup message: ""pnpfelin invalid Id"
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #27 on: December 16, 2012, 07:23:40 PM »
i have to sleep some time melfager

install the drivers
start livesuit and select the full rom image you want to use
plug in usb between computer and tab
hold down vol up
press and hold the power on for 3 to 5 seconds
livesuit shud detect the tablet

if it doesnt then you need  to check windows device manager and look for a yellow triangle
then install manually .. point to the uberizer usb drivers directory to install


Well... after fixing the drivers as satcom said, live suit now detects my device but it gives me a popup message: ""pnpfelin invalid Id"

what is the name of the rom you are trying to flash?
what version of livesuit are you using ?
are you trying to do a update or a forced format ?
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline melfager

  • Jr. Member
  • **
  • Thank You
  • -Given: 9
  • -Received: 6
  • Posts: 76
  • Karma: +7/-0
  • Always seeking knowledge
  • Tablet / Size / Model: A13 / 7" / MID-708
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #28 on: December 16, 2012, 07:27:40 PM »
- ROM name: A13_MID_nuclear_pfdq88c-eng-IMM76D-Factory_Image_[TechKnowForum.net]
- LiveSuit version: 1.09

- I didn't reach this stage yet ... the popup appears right after my device is detected
MELFAGER

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4298
  • Posts: 15934
  • Karma: +4736/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Flash a custom ROM to my TWD_MID A13 tablet
« Reply #29 on: December 16, 2012, 07:32:58 PM »
- ROM name: A13_MID_nuclear_pfdq88c-eng-IMM76D-Factory_Image_[TechKnowForum.net]
- LiveSuit version: 1.09

- I didn't reach this stage yet ... the popup appears right after my device is detected

either try a different image or try a different livesuit .. i have not seen this error and there are not many reference that i can find for this error . ..I did find a ref that suggest using livesuit v 1.0.7

what happens if you just try to let the tablet boot?  does it boot into recovery or what exactly does it do?
« Last Edit: December 16, 2012, 07:36:17 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

 

Powered by EzPortal