Author Topic: When Uberizer can not detect your model  (Read 2916 times)

0 Members and 1 Guest are viewing this topic.

Offline HardcoreHacker

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 6745
  • -Received: 2029
  • Posts: 8233
  • Karma: +3072/-99
When Uberizer can not detect your model
« on: October 28, 2012, 02:40:31 AM »
Hello Visitor!

When Uberizer can not detect your model it's most probably due it has failed to get your build.prop.

The device that you connect will need drivers to be installed, the most common drivers for this have been added to the \usb_driver directory. Or you can give the "uberizer.exe i" switch a shot that tries to pre-install all included drivers. Windows XP will recognize without a reboot any newly connected device after the pre-installation. Run "uberizer.exe u" or the start menu shortcut to remove the drivers. If this fails, maybe your device came with a CD, and some phones have the driver stored on the flash memory.

The Android device you have must be setup correctly to use ADB, go to "Settings \ Developer options \ USB debugging" and check "Debug mode when USB is connected"

Good luck,

HcH
« Last Edit: October 29, 2012, 11:56:34 PM by HardcoreHacker »

 

Powered by EzPortal