Author Topic: new firmware  (Read 14382 times)

0 Members and 1 Guest are viewing this topic.

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
new firmware
« on: September 21, 2012, 09:10:11 AM »

Offline reborn

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 2
  • Posts: 18
  • Karma: +2/-0
  • Pobre Dios devorador, perdiĆ³ totalmente el control
  • Tablet / Size / Model: EKEN W70 - VIA WM8850
Re: new firmware
« Reply #1 on: September 22, 2012, 01:56:03 AM »
Hi,
I tested this new firm in my eken w70 but touch not work.
It's weird because the previous firm (MaPan MX7650B Software 2012.8.15.rar) worked perfectly.


Anyway, in the Eken website is now available the model firm w70: http://eken.com/support/
« Last Edit: September 22, 2012, 02:18:15 AM by reborn »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4811
  • Posts: 16950
  • Karma: +5273/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: new firmware
« Reply #2 on: September 22, 2012, 02:05:02 AM »
Hi,
I tested this new firm in my eken w70 but touch not work.
It's weird because the previous firm (MaPan MX7650B Software 2012.8.15.rar) worked perfectly.


Anyway, in the Eken website is now available the model firm w70: ftp://202.105.131.8/


please fix the ftp link  ... you have an http://  preceding the ftp   wont work !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline diabetu

  • VIP Moderator
  • Full Member
  • *
  • Thank You
  • -Given: 74
  • -Received: 179
  • Posts: 138
  • Karma: +201/-2
  • Uber-Noobie
  • Tablet / Size / Model: CubieBoard, Cube U23GT,Gemei G3 , WM8850 Tablet
Re: new firmware
« Reply #3 on: September 23, 2012, 09:44:18 PM »
Hi,
I tested this new firm in my eken w70 but touch not work.
It's weird because the previous firm (MaPan MX7650B Software 2012.8.15.rar) worked perfectly.


Anyway, in the Eken website is now available the model firm w70: http://eken.com/support/


Confirm this problem !!! Don't try this firmware on W70!

Offline 1024mb

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850
Re: new firmware
« Reply #4 on: September 24, 2012, 07:24:23 AM »
 :android-cry:
how flash back to 0.9.5 firmware?
0.9.5 everything is working
tried to flash 1.1.0 eken w70
but the touch screen also does not work

Offline reborn

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 2
  • Posts: 18
  • Karma: +2/-0
  • Pobre Dios devorador, perdiĆ³ totalmente el control
  • Tablet / Size / Model: EKEN W70 - VIA WM8850
Re: new firmware
« Reply #5 on: September 25, 2012, 06:11:53 AM »
:android-cry:
how flash back to 0.9.5 firmware?
0.9.5 everything is working
tried to flash 1.1.0 eken w70
but the touch screen also does not work


http://eken.com/support/ ...there you will find the firm for w70 or just read the forum posts, is a hot topic

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #6 on: October 01, 2012, 03:41:17 PM »

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 7107
  • -Received: 2178
  • Posts: 8471
  • Karma: +3230/-99
Re: new firmware
« Reply #7 on: October 01, 2012, 04:38:44 PM »
Thanks MicroDVD,

so we need to seek up that one :)

Cheers,

HcH

Offline bmaster

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 15
  • Posts: 13
  • Karma: +17/-0
  • Uber-Noobie
  • Tablet / Size / Model: EKEN W70 / 7''
Re: new firmware
« Reply #8 on: October 02, 2012, 09:01:39 AM »
There is new firmware at mapan site: http://index.maixin-china.com/download/software/MX7650B_Firmware_20120928.rar. Inside Firmwareinstall/firmware directory the file VERSION says its ro.wmt.pkgver=1.30.00 . I havent test yet but will try it today. Regards.

Offline oreo27

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 6
  • Posts: 10
  • Karma: +6/-0
  • Android Noob
    • Dailymobile Forums
  • Tablet / Size / Model: Share MID-2330 (WM8850, Eken W70 Clone)
Re: new firmware
« Reply #9 on: October 03, 2012, 02:53:13 AM »
There is new firmware at mapan site: http://index.maixin-china.com/download/software/MX7650B_Firmware_20120928.rar. Inside Firmwareinstall/firmware directory the file VERSION says its ro.wmt.pkgver=1.30.00 . I havent test yet but will try it today. Regards.


Let us know what happens. How about the Eken site? Any updates on there?

Offline bmaster

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 15
  • Posts: 13
  • Karma: +17/-0
  • Uber-Noobie
  • Tablet / Size / Model: EKEN W70 / 7''
Re: new firmware
« Reply #10 on: October 03, 2012, 07:52:46 AM »
This firmware also like previous has bug with not working touchscreen after install. To make it work use this thread: http://www.techknow.t0xic.nl/forum/index.php?topic=3534.0. Since yesterday wifi havent dropped connection even once, seems the bug is fixed. But still tablet freeze somtimes and need restart manualy. I personally used config folder from official eken w70 firmware 1.2.0 (not sure wich one used Raybong in his thread), because got problems running MX player with mapan firmware and maybe comething in config cause this. Still no eken official firmware update to this version. Also OTA Update just doesnt work it always says you have latest version.

Offline oreo27

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 6
  • Posts: 10
  • Karma: +6/-0
  • Android Noob
    • Dailymobile Forums
  • Tablet / Size / Model: Share MID-2330 (WM8850, Eken W70 Clone)
Re: new firmware
« Reply #11 on: October 03, 2012, 05:58:51 PM »
This firmware also like previous has bug with not working touchscreen after install. To make it work use this thread: http://www.techknow.t0xic.nl/forum/index.php?topic=3534.0. Since yesterday wifi havent dropped connection even once, seems the bug is fixed. But still tablet freeze somtimes and need restart manualy. I personally used config folder from official eken w70 firmware 1.2.0 (not sure wich one used Raybong in his thread), because got problems running MX player with mapan firmware and maybe comething in config cause this. Still no eken official firmware update to this version. Also OTA Update just doesnt work it always says you have latest version.


I'm not entirely too sure but I remember when I flashed with MX7650B software, the touchscreen didn't work either. I had to use the official Eken firmware. No freezes here (W70-1.1.0--20120815). Rooted using RootBurner. Modded build.prop file. You can check that out here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3567.0

Any difference on the MX7650B software that will necessarily make it better than what I'm already using?

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #12 on: October 04, 2012, 06:57:39 AM »
I'm not entirely too sure but I remember when I flashed with MX7650B software, the touchscreen didn't work either. I had to use the official Eken firmware. No freezes here (W70-1.1.0--20120815). Rooted using RootBurner. Modded build.prop file. You can check that out here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3567.0

Any difference on the MX7650B software that will necessarily make it better than what I'm already using?


My w70 clone(top right camera)+MX7650B_Firmware_20120928.rar(1.3.0)= touchscreen don't work

solve this problem:
run \FirmwareInstall\config\FMaker.exe
File --> Open... --> +MaiXin_MaPan_MX7650B_ETF2127_ZCC1943_A.fwc

setting touchscreen = CPT7_PUZHI_AUTO






File --> save

reflash this firmware


Offline oreo27

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Received: 6
  • Posts: 10
  • Karma: +6/-0
  • Android Noob
    • Dailymobile Forums
  • Tablet / Size / Model: Share MID-2330 (WM8850, Eken W70 Clone)
Re: new firmware
« Reply #13 on: October 04, 2012, 10:02:39 AM »
I'm not entirely too sure but I remember when I flashed with MX7650B software, the touchscreen didn't work either. I had to use the official Eken firmware. No freezes here (W70-1.1.0--20120815). Rooted using RootBurner. Modded build.prop file. You can check that out here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3567.0

Any difference on the MX7650B software that will necessarily make it better than what I'm already using?


My w70 clone(top right camera)+MX7650B_Firmware_20120928.rar(1.3.0)= touchscreen don't work

solve this problem:
run \FirmwareInstall\config\FMaker.exe
File --> Open... --> +MaiXin_MaPan_MX7650B_ETF2127_ZCC1943_A.fwc

setting touchscreen = CPT7_PUZHI_AUTO






File --> save

reflash this firmware


Thanks for the info. +1

But how is the Maixin Firmware different from the Eken firmware in terms of performance/usability?

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #14 on: October 04, 2012, 10:45:26 AM »
Thanks for the info. +1

But how is the Maixin Firmware different from the Eken firmware in terms of performance/usability?

my experence:
1.
w70 clone + 1.1.0 --> HDMI out to TV = no picture
w70 clone + 1.2.0 --> HDMI out to TV = has picture
w70 clone + 1.3.0 --> HDMI out to TV = has picture

2.
1.2.0 has the shortest booting time


Offline denden

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 2
  • Posts: 5
  • Karma: +2/-0
  • Uber-Noobie
  • Tablet / Size / Model: acer n356
Re: new firmware
« Reply #15 on: October 05, 2012, 07:59:03 PM »
Dont use this on an eken w70, it borks the ability to use flash.

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #16 on: October 06, 2012, 01:37:52 AM »
MX7650B_Firmware_20120928.rar  Norton virus warning ?

edit:

re-download MX7650B_Firmware_20120928.rar and scan it again, has virus warning.
but unrar MX7650B_Firmware_20120928.rar to one directory and re-scan it , no virus warning.

I don't know why.

« Last Edit: October 06, 2012, 04:03:02 AM by MicroDVD »

Offline diabetu

  • VIP Moderator
  • Full Member
  • *
  • Thank You
  • -Given: 74
  • -Received: 179
  • Posts: 138
  • Karma: +201/-2
  • Uber-Noobie
  • Tablet / Size / Model: CubieBoard, Cube U23GT,Gemei G3 , WM8850 Tablet
Re: new firmware
« Reply #17 on: October 11, 2012, 07:21:32 PM »
Hi,
The file  MX7650B_Firmware_20120928/FirmwareInstall/config/lpk.dll    is reported as Trojan.Win32.MicroFake.ba !
This file do not exist into old firmware from MAPAN!

In firmware for 10" WM8850 tablet the file MaPan_MX88T_Firmware_20120825xi/FirmwareInstall/config/FMaker.exe   is reported as virus Virus.Win32.Alman.b !
« Last Edit: October 11, 2012, 07:24:56 PM by diabetu »

Offline f1890

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-mid 7inch
Re: new firmware
« Reply #18 on: October 17, 2012, 02:09:34 AM »
Hi, I had the  some problem with MX7650B_Firmware_20120928.rar file (avast was reporting it as infected) so i downloaded it with my cell phone and after decompresing it i scaned it removed the infected file and transfered the rest files to the sd card. I flashed my bricked wm8850 and it returned to life with no obvious problems. :android-smile:
Despite everything seems working fine im very curious if i could use the eken firmware and after reading all the relative posts i can't make a decision. :android-shocked:
Is there anyone who attempted it?

Offline tchak

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 1
  • Posts: 8
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #19 on: October 19, 2012, 11:07:29 AM »
Hi All!

Just to let you all know that I'm another happy WM8850 user that applied the MX7650B_Firmware_20120928.rar with MicroDVD instructions

Works just fine mate, you're the best!

Its now about 1 day of forced sleeps/wake-ups and no more Wi-Fi issues!!!

Thanks!  8-)  :android-batman:

Offline nrygt

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 6
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: eken w70 / 7" / clone
Re: new firmware
« Reply #20 on: October 19, 2012, 11:24:40 AM »
how can i download MX7650B_Firmware_20120928.rar file?? i tried everything (close nod32, different browsers)  tousend time and i get error from each download...

Offline f1890

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-mid 7inch
Re: new firmware
« Reply #21 on: October 19, 2012, 01:46:53 PM »
You could try downloading it from your smartphone, if you have one!
Otherwise you could deactivate your antivirus and restart the computer and make sure that antivirus is still off after restarting and then download the file. But I wouldn't recommend that because it will leave your pc unprotected so better try a virtual pc so you don't infect your computer.

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #22 on: October 24, 2012, 03:50:29 AM »
newest one,

MAPAN_MX7650B_Firmware_20121021.rar  (1.3.0)

\FirmwareInstall\config\FMaker.exe (virus warning)

Offline tchak

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 1
  • Posts: 8
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #23 on: October 24, 2012, 07:46:33 AM »
newest one,

MAPAN_MX7650B_Firmware_20121021.rar  (1.3.0)

\FirmwareInstall\config\FMaker.exe (virus warning)
Thanks for the heads up mate, downloading started...

Offline tchak

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 1
  • Posts: 8
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #24 on: October 24, 2012, 09:26:05 AM »
newest one,

MAPAN_MX7650B_Firmware_20121021.rar  (1.3.0)

\FirmwareInstall\config\FMaker.exe (virus warning)
Thanks for the heads up mate, downloading started...
...installation completed, so far so good  :android-batman:

Offline nrygt

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 6
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: eken w70 / 7" / clone
Re: new firmware
« Reply #25 on: October 30, 2012, 07:44:34 AM »
 Anyone knows is there any hope for android 4.1 jellybean ??

Offline dodukdoduk

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: wm8650 / 7 inches
Re: new firmware
« Reply #26 on: November 01, 2012, 11:34:40 PM »
I'm not entirely too sure but I remember when I flashed with MX7650B software, the touchscreen didn't work either. I had to use the official Eken firmware. No freezes here (W70-1.1.0--20120815). Rooted using RootBurner. Modded build.prop file. You can check that out here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3567.0

Any difference on the MX7650B software that will necessarily make it better than what I'm already using?


My w70 clone(top right camera)+MX7650B_Firmware_20120928.rar(1.3.0)= touchscreen don't work

solve this problem:
run \FirmwareInstall\config\FMaker.exe
File --> Open... --> +MaiXin_MaPan_MX7650B_ETF2127_ZCC1943_A.fwc

setting touchscreen = CPT7_PUZHI_AUTO






File --> save

reflash this firmware


when i do this the touch command is inverted. when i swipe to left the command will be right.. vice versa.

Offline dodukdoduk

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: wm8650 / 7 inches
Re: new firmware
« Reply #27 on: November 01, 2012, 11:40:54 PM »
do you get an error when you extract the firmware? thankyou.

Offline MicroDVD

  • Site Donor
  • Jr. Member
  • *
  • Thank You
  • -Given: 0
  • -Received: 88
  • Posts: 74
  • Karma: +92/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: new firmware
« Reply #28 on: November 02, 2012, 07:56:21 AM »
when i do this the touch command is inverted. when i swipe to left the command will be right.. vice versa.


G-Sensor try mc3230sensor_1

http://electronmania.blogspot.tw/2012/10/translate-via-8850-fmaker-program.html

Offline eaz2706

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 9
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850
Re: new firmware
« Reply #29 on: November 11, 2012, 09:41:32 AM »
Does not work for me. Please, how do I do this fix and is there anything else I could do to fix the touchscreen?

 

Powered by EzPortal