Author Topic: Help needed with flashing A13-Mid Tablet  (Read 28363 times)

0 Members and 1 Guest are viewing this topic.

Offline prosttyle

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: m7206
Re: Help needed with flashing A13-Mid Tablet
« Reply #30 on: September 13, 2012, 05:01:55 AM »
Sadly did not work on my A13, no TS and moved screen.

Offline normajean82

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID 7"
Re: Help needed with flashing A13-Mid Tablet
« Reply #31 on: September 18, 2012, 02:24:08 PM »
Hi,

after flashing my device the screen is about 1cm moved to the left too, is there any easy solution?

The comment posted by steveharris doesn't seem easy to do, some instructions for beginners or at least a tutorial?

"For ones who have 1cm shift onscreen, you can try use this /dev/block/nanda dump from stock firmware with your updated firmware https://dl.dropbox.c...0/q88-nanda.tar
Just mount /dev/block/nanda, it is in FAT, and replace script.bin with one from .tar. You can also try to use default kernel, its also is in nanda and can be easily replaced."
« Last Edit: September 18, 2012, 02:28:56 PM by normajean82 »

Offline azwan92

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 10
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID Q88 7
Re: Help needed with flashing A13-Mid Tablet
« Reply #32 on: October 20, 2012, 10:07:39 AM »

For ones who have 1cm shift onscreen, you can try use this /dev/block/nanda dump from stock firmware with your updated firmware https://dl.dropbox.com/u/1096320/q88-nanda.tar
Just mount /dev/block/nanda, it is in FAT, and replace script.bin with one from .tar. You can also try to use default kernel, its also is in nanda and can be easily replaced.

For futher info refer to #arm-netbook@freenode or linux-sunxi wiki.

Best Regards, Dmitriy.

hi, the instruction is not clear for me, i already download nanda.tar ,then what should i do, can you give more detail about how to mount /dev/block/nanda  and replace script?  thanks in advance..   :android-smile:

Offline azwan92

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 10
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID Q88 7
Re: Help needed with flashing A13-Mid Tablet
« Reply #33 on: October 20, 2012, 03:09:27 PM »
after flashing 8 different .img files i found one that works here http://www.pandawillforum.com/soft/Yeahpad%20A13%20ROM.rar if you want to add it to your list :) Thanks for all the help guys it is appreciated :)

Also i found this fix to the offset  in-case anyone needs it

Hi, this tablet is called Q88 (name on the pcb is Q88, system name in android is nuclear, build name is nuclear-pfdq88). Other names like "yeahpad" is just OEM rebranding.
I've created a page on linux-sunxi wiki with description, photos of internals and info about how to connect UART. http://linux-sunxi.org/Q88

Work on booting custom kernel from MMC is going on, for now we have working u-boot that loads from MMC, but there is still problems with loading kernel (crashes on any printk). when this problems will be resolved, any A10 android tree can be ported to A13 because they are pretty much same thing, except A13 doesnt have SATA/HDMI and package is qfp instead of BGA.

For ones who have 1cm shift onscreen, you can try use this /dev/block/nanda dump from stock firmware with your updated firmware https://dl.dropbox.com/u/1096320/q88-nanda.tar
Just mount /dev/block/nanda, it is in FAT, and replace script.bin with one from .tar. You can also try to use default kernel, its also is in nanda and can be easily replaced.

For futher info refer to #arm-netbook@freenode or linux-sunxi wiki.

Best Regards, Dmitriy.


can you give detail how to replace the script.bin on .tar and how to mount /dev/block/nanda?? please help, the one only problem is 1cm to right on screen..

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #34 on: October 20, 2012, 05:41:02 PM »
people stop flashing your A13 ..
if your existing rom is work leave it alone !
or make a rom dump of it BEFORE you flash it ..
we will not write a procedure .. either learni it or keep
searching for a rom .. it is already posted not to flash these things
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline azwan92

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 10
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID Q88 7
Re: Help needed with flashing A13-Mid Tablet
« Reply #35 on: October 20, 2012, 06:50:12 PM »
people stop flashing your A13 ..
if your existing rom is work leave it alone !
or make a rom dump of it BEFORE you flash it ..
we will not write a procedure .. either learni it or keep
searching for a rom .. it is already posted not to flash these things

My reason for flash it because I got problem from early..I just want to repair it back to normal,if not my tablet will never can use.. the problem is occured after I install aplication from playstore and after reboot, it stuck on green logo, if the problem can be solved, I will never try to flash it anymore...

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #36 on: October 20, 2012, 06:55:36 PM »
people stop flashing your A13 ..
if your existing rom is work leave it alone !
or make a rom dump of it BEFORE you flash it ..
we will not write a procedure .. either learni it or keep
searching for a rom .. it is already posted not to flash these things

My reason for flash it because I got problem from early..I just want to repair it back to normal,if not my tablet will never can use.. the problem is occured after I install aplication from playstore and after reboot, it stuck on green logo, if the problem can be solved, I will never try to flash it anymore...

well you will just have to keep searching and flashing .. an app called uberizer is in works .. but due to the sheer volume A13 clones and A13 roms it is impossible right now to create a one rom fits all .. just wont happen !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline azwan92

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 10
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID Q88 7
Re: Help needed with flashing A13-Mid Tablet
« Reply #37 on: October 20, 2012, 07:26:31 PM »
people stop flashing your A13 ..
if your existing rom is work leave it alone !
or make a rom dump of it BEFORE you flash it ..
we will not write a procedure .. either learni it or keep
searching for a rom .. it is already posted not to flash these things

My reason for flash it because I got problem from early..I just want to repair it back to normal,if not my tablet will never can use.. the problem is occured after I install aplication from playstore and after reboot, it stuck on green logo, if the problem can be solved, I will never try to flash it anymore...

well you will just have to keep searching and flashing .. an app called uberizer is in works .. but due to the sheer volume A13 clones and A13 roms it is impossible right now to create a one rom fits all .. just wont happen !

Thanks a lot , at list you've understand my problem..now I already have stable room and suitable for my tablet, just only one problem to solve,that's 1cm screen move to left,From my research, we can change the script or any else manually, do u have an idea?

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #38 on: October 20, 2012, 07:43:22 PM »
the only known process is the one that steveharris87
did .. now you will have to do that yourself .. we do not have script or
anything to do that for you .. nor do we have a guide that wil fix just this one
isse .. the issue is with the rom you are using .. either try different one
or GET THE ROM FROM YOUR SELLER !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline gongon22

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 15
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android 4.0 / 7" /5 point capacitive A13
Re: Help needed with flashing A13-Mid Tablet
« Reply #39 on: October 24, 2012, 01:32:29 PM »
hello all , i flashed my A13B and now got uberoid (its great all works except g-sensor ) but my TS is 1cm gone to right side .

can anyone pls make tutorial step by step ,what to do in that case (for us newbie  :'( :'( :'( )


Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #40 on: October 24, 2012, 01:35:43 PM »
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline gongon22

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 15
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android 4.0 / 7" /5 point capacitive A13
Re: Help needed with flashing A13-Mid Tablet
« Reply #41 on: October 24, 2012, 01:43:55 PM »
dude i'm on this forum since my tablet stoped working .
all of u did the great job here ,i know we are all annoying with our problems ...but dont be sarcastic ...

If u know how to deal with tablet problems it not necessarily mean that we all know ..


im just asking will someone do that in future or will i have to do it by myself (probablay f***up my tablet )

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #42 on: October 24, 2012, 01:53:05 PM »
dude i'm on this forum since my tablet stoped working .
all of u did the great job here ,i know we are all annoying with our problems ...but dont be sarcastic ...

If u know how to deal with tablet problems it not necessarily mean that we all know ..


im just asking will someone do that in future or will i have to do it by myself (probablay f***up my tablet )

i am only pointing you to the resources that are available for that issue  ;) - in no way to be sarcastic but by all means to try and help  :tongue:

you are not annoying.... we are here because we enjoy helping.... i have not done that procedure yet and therefore i am not the one to write such a tutorial for others. I am sure soon the procedure will be written in a easier-to-follow guide but not atm .....that was not sarcism but a auto-response link we have to direct members to the faq's

you might want to look at our roms section for the a13 and try those or get the original rom from your re-seller if you can not follow the procedure.... i agree IT DOES NEED TO BE WRITTEN SIMPLER  ;)
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline gongon22

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 15
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android 4.0 / 7" /5 point capacitive A13
Re: Help needed with flashing A13-Mid Tablet
« Reply #43 on: October 24, 2012, 02:03:08 PM »
my seller dont have it ,since i buyed tablet from ebay seller (mistake)

i was flashing it with all roms u got here and last one was uberoid  :android-lol: and all works except 1cm shifted TS ..so i'm afraid that i will do something wrong ...



thank you for understanding  ;)

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #44 on: October 24, 2012, 02:23:43 PM »
np  ;)    i hope you get it sorted.... we do have excellent members that will also try to assist you
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline gongon22

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 15
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android 4.0 / 7" /5 point capacitive A13
Re: Help needed with flashing A13-Mid Tablet
« Reply #45 on: November 01, 2012, 02:21:13 PM »
Can anyone just say what program do i need to use to mount my img file (rom) .

Even if nobody wants to tell how to do it ,at least tell what program to use ........

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #46 on: November 01, 2012, 04:55:09 PM »
Can anyone just say what program do i need to use to mount my img file (rom) .

Even if nobody wants to tell how to do it ,at least tell what program to use ........

what do you mean mount the img?  This is not a normal image file that you can use with programs like daemon tools or even nero .. you need to use a 64bit linux and tear the image apart ..using the rom kitchen from like say miniand
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline nyioo7

  • Jr. Member
  • **
  • Thank You
  • -Given: 15
  • -Received: 51
  • Posts: 69
  • Karma: +54/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13 7" Allwinner
Re: Help needed with flashing A13-Mid Tablet
« Reply #47 on: November 01, 2012, 05:07:53 PM »
Can anyone just say what program do i need to use to mount my img file (rom) .

Even if nobody wants to tell how to do it ,at least tell what program to use ........

I swear to god. Doesn't anybody know how to use Google? https://www.miniand.com/wiki/Allwinner/Unpacking+and+building+LiveSuit+images

I googled how to extract Allwinner img file and this was my first page result............

It's not that nobody wants to tell you what and how to do it. It's just that nobody wants to repeat things over and over for the 10000th times.
« Last Edit: November 01, 2012, 05:22:41 PM by nyioo7 »

Offline gongon22

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 15
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android 4.0 / 7" /5 point capacitive A13
Re: Help needed with flashing A13-Mid Tablet
« Reply #48 on: November 01, 2012, 05:44:30 PM »
Can anyone just say what program do i need to use to mount my img file (rom) .

Even if nobody wants to tell how to do it ,at least tell what program to use ........

I swear to god. Doesn't anybody know how to use Google? https://www.miniand.com/wiki/Allwinner/Unpacking+and+building+LiveSuit+images


I googled how to extract Allwinner img file and this was my first page result............

It's not that nobody wants to tell you what and how to do it. It's just that nobody wants to repeat things over and over for the 10000th times.


i didnt googled "Allwinner image" damn .....i'm new here and this is my first tablet (low budget experiment)

THANK YOUUUUUUUUUUUUUUU ,this link should have a special place here lol ....this answer should be here when i first time asked  :android-tongue: :android-tongue:

Offline nyioo7

  • Jr. Member
  • **
  • Thank You
  • -Given: 15
  • -Received: 51
  • Posts: 69
  • Karma: +54/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13 7" Allwinner
Re: Help needed with flashing A13-Mid Tablet
« Reply #49 on: November 01, 2012, 05:46:55 PM »
i didnt googled "Allwinner image" damn .....i'm new here and this is my first tablet (low budget experiment)

THANK YOUUUUUUUUUUUUUUU ,this link should have a special place here lol ....this answer should be here when i first time asked  :android-tongue: :android-tongue:

It's in the FAQ..... Since the tablets came out.....

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #50 on: November 01, 2012, 05:49:44 PM »
Can anyone just say what program do i need to use to mount my img file (rom) .

Even if nobody wants to tell how to do it ,at least tell what program to use ........

I swear to god. Doesn't anybody know how to use Google? https://www.miniand.com/wiki/Allwinner/Unpacking+and+building+LiveSuit+images


I googled how to extract Allwinner img file and this was my first page result............

It's not that nobody wants to tell you what and how to do it. It's just that nobody wants to repeat things over and over for the 10000th times.


i didnt googled "Allwinner image" damn .....i'm new here and this is my first tablet (low budget experiment)

THANK YOUUUUUUUUUUUUUUU ,this link should have a special place here lol ....this answer should be here when i first time asked  :android-tongue: :android-tongue:

why shud it be here when you asked the first time?  Rom kitchens are not for every users .. not everyone  has both a win7 machine and a linux 64 bit machine with ubuntu .. things like ROM KITCHEN are great searches that come up with miniand and various other kitechns ..
not to mention even the uberizer has a kitchen in it !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline HardcoreHacker

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 6293
  • -Received: 1916
  • Posts: 7822
  • Karma: +2923/-97
Re: Help needed with flashing A13-Mid Tablet
« Reply #51 on: November 02, 2012, 08:50:43 PM »
The Uberizer can pack/repack IMG files and has ALL instruction for that here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3819.0

And all the repacking instructions are here:

http://www.techknow.t0xic.nl/forum/index.php?topic=1679

HcH

Offline lucanz

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 1
  • Posts: 3
  • Karma: +1/-0
  • Uber-Noobie
Re: Help needed with flashing A13-Mid Tablet
« Reply #52 on: January 15, 2013, 01:48:30 AM »
Hi, newbie here.

This is for nuclear_pfdq88d-eng 5.0.9 IMM76D 20121027 TEST-KEYS. 7" tab with dual camera, 512mb + 4gb internal rom.

I also had problem with mid tab when my son put pattern lock and could not unlock it. Stuck at the screen asking for google email and password but not working.

I've downloaded lots of image files and rom but none succeed till i downlod this img http://index.maixin-china.com/download/software/MaPan_MX713_DC_Firmware_HG20121029.rar. For sure i lost all data but worthit to get the tab working again. What i do i used livesuit 1.09, flash and format the tw mid tab. Work okey with touchscreen and no stuck at the logo when booting. Everything seems very smooth. I think this image will work with any nuclear_pfdq88d-eng.  Give a try but i won't responsible if anything happened or not succeed.
« Last Edit: January 15, 2013, 02:03:50 AM by lucanz »

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #53 on: January 15, 2013, 06:49:08 AM »
Hi, newbie here.

I also had problem with mid tab when my son put pattern lock and could not unlock it. Stuck at the screen asking for google email and password but not working.

you can use the uberizer to get past the screen lock if this happens in the future  8-) flashing is too risky  :android-nerd:
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline lucanz

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 1
  • Posts: 3
  • Karma: +1/-0
  • Uber-Noobie
Re: Help needed with flashing A13-Mid Tablet
« Reply #54 on: January 16, 2013, 01:24:57 AM »
No luck with the uberizer, don't know why may be driver didn't work. Everything ok after flashing using livesuit 1.07. By the way thanks for the info.

Offline satcomranger

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 293
  • -Received: 4299
  • Posts: 15938
  • Karma: +4737/-47
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Help needed with flashing A13-Mid Tablet
« Reply #55 on: January 16, 2013, 01:30:18 AM »
No luck with the uberizer, don't know why may be driver didn't work. Everything ok after flashing using livesuit 1.07. By the way thanks for the info.

that is the most likely cause .. the uberizer needs the driver for the Android Debug Bridge installed which are different from the livesuit!
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline dewis_g

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 1
  • Posts: 6
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: mid a13/7/713
Re: Help needed with flashing A13-Mid Tablet
« Reply #56 on: February 15, 2013, 02:15:57 AM »
hi steveharris87, i have shift screen ,you could make tutorial for those who do not understand much of linux
thanks

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #57 on: February 15, 2013, 03:55:00 AM »
hi steveharris87, i have shift screen ,you could make tutorial for those who do not understand much of linux
thanks

have you searched forum for "screen shift"  :android-question:   ....it is covered in a few topics already - might be something there linux-friendly already - in case you do not get a reply soon  ;)

Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

Offline auraemas

  • Newbie
  • *
  • Thank You
  • -Given: 15
  • -Received: 6
  • Posts: 28
  • Karma: +6/-0
  • Uber-Noobie
Re: Help needed with flashing A13-Mid Tablet
« Reply #58 on: February 15, 2013, 01:05:04 PM »
Hi, newbie here.

I also had problem with mid tab when my son put pattern lock and could not unlock it. Stuck at the screen asking for google email and password but not working.

you can use the uberizer to get past the screen lock if this happens in the future  8-) flashing is too risky  :android-nerd:
May i ask you how? i mean the step?

Offline twjordo

  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 4710
  • -Received: 2251
  • Posts: 6869
  • Karma: +2542/-26
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: Help needed with flashing A13-Mid Tablet
« Reply #59 on: February 15, 2013, 03:50:23 PM »
you can use the uberizer to get past the screen lock if this happens in the future  8-) flashing is too risky  :android-nerd:
May i ask you how? i mean the step?

k   21     ;)
Guest consider a donation  - Thanks!
▌│█║▌║▌║ ⓤⓑⓔⓡⓞⓘⓓ + ⓤⓑⓔⓡⓘⓩⓔⓡ ║▌║▌║█│▌
™©®

 

Powered by EzPortal