Author Topic: Tutorial How to install uberoid v12 beta2 wm8650 for dummy  (Read 31943 times)

0 Members and 1 Guest are viewing this topic.

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« on: June 06, 2012, 04:59:36 PM »
I made a tutorial on How to install uberoid v12 beta2 wm8650 for dummy hoping it will help someone new :) if the tutorial have errors please tell me :) i will make correction for it :)


Tutorial updated!
« Last Edit: October 24, 2012, 11:00:55 PM by ZapMe1 »
:faq:Guest:faq:

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: How to install uberoid v12 beta2 wm8650 for dummy
« Reply #1 on: June 06, 2012, 05:00:50 PM »
Download all these 3 part and extract :)
« Last Edit: June 07, 2012, 04:19:28 PM by black_championro »
:faq:Guest:faq:

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4808
  • Posts: 16950
  • Karma: +5270/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #2 on: June 06, 2012, 09:34:30 PM »
very well done

On page two you show extracting using 7 zip  and the extract to a prenamed folder
then on page 3 you show picking a folder to extract to ...

If you choose the prenamed folder then it starts to extract to that folder it doesnt give you further options on where to extract to ..

to avoid confusion you use 7zip to do your extraction .. yet icons etc are showing winrar .. Since winrar is a paid application then i would suggest you use 7zip as it is free ..

Excellant job  Hats off to ya!
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 7090
  • -Received: 2165
  • Posts: 8456
  • Karma: +3217/-99
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #3 on: June 07, 2012, 12:00:00 AM »
Nice job mate! Shall I make this topic sticky ? I sure deserves it!

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #4 on: June 07, 2012, 12:36:57 AM »
Thanks guys. i will make correction and reupload it :) Hch sure if you want to make it sticky :)
:faq:Guest:faq:

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 7090
  • -Received: 2165
  • Posts: 8456
  • Karma: +3217/-99
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #5 on: June 07, 2012, 01:41:26 AM »
Hey black_championro,

Cool! Thanks for updating it! I'll make the post sticky, this will help members. Also I'll upload the updated version to the downloads section if you don't mind.

HcH

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #6 on: June 07, 2012, 04:22:16 PM »
Hey black_championro,

Cool! Thanks for updating it! I'll make the post sticky, this will help members. Also I'll upload the updated version to the downloads section if you don't mind.

HcH

The tutorial have been updated :) . sure hch if ypu want to :) im just hoping that this tutorial will help members :)
:faq:Guest:faq:

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #7 on: June 08, 2012, 04:08:50 PM »
UPDATED#
:faq:Guest:faq:

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 7090
  • -Received: 2165
  • Posts: 8456
  • Karma: +3217/-99

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #9 on: June 08, 2012, 04:35:31 PM »
Thanks HCH :)
:faq:Guest:faq:

Offline Artezj73

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WonderMedia 8" Wm8650
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #10 on: June 23, 2012, 08:22:35 AM »
 :android-smile: :android-smile: :android-smile: :android-smile: :android-smile: :android-smile: :android-smile: :android-smile:
thank Im a happy camper thx 2 u guys

Offline Artezj73

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WonderMedia 8" Wm8650
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #11 on: June 23, 2012, 09:24:02 AM »
 :android-smile: THX U R A life saver

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #12 on: June 23, 2012, 12:15:43 PM »
no problem glad it helps ya
_
:faq:Guest:faq:

Offline frigid88

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: wondermedia WM8650
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #13 on: July 02, 2012, 02:49:18 AM »
Thanks Master for this. i was able to flash this uberoid v12.

however, whenever I shutdown and start my Tab. it flash it again.

is there any part i missed on the guide?

i follow page 1-6 of the guide.
thanks again for the wonderfull guide

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4808
  • Posts: 16950
  • Karma: +5270/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #14 on: July 02, 2012, 03:01:30 AM »
Thanks Master for this. i was able to flash this uberoid v12.

however, whenever I shutdown and start my Tab. it flash it again.

is there any part i missed on the guide?

i follow page 1-6 of the guide.
thanks again for the wonderfull guide

afte it has flashed and it tells you to remove the sd card .. remove it .. and let your tablet reboot without the sd card .. copy the backup contents from the sd card and store it safely on yur computer.. then reformat the sd card to fat32 full format so there is nothing on it ..  shut down the tablt install the freshly formatted card .. turn on the tab ..

Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline frigid88

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: wondermedia WM8650
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #15 on: July 02, 2012, 04:06:11 AM »
Thanks Master for this. i was able to flash this uberoid v12.

however, whenever I shutdown and start my Tab. it flash it again.

is there any part i missed on the guide?

i follow page 1-6 of the guide.
thanks again for the wonderfull guide

afte it has flashed and it tells you to remove the sd card .. remove it .. and let your tablet reboot without the sd card .. copy the backup contents from the sd card and store it safely on yur computer.. then reformat the sd card to fat32 full format so there is nothing on it ..  shut down the tablt install the freshly formatted card .. turn on the tab ..

now it work like charm..  thank you so much

Offline plouk

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 1
  • Posts: 4
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8650
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #16 on: July 20, 2012, 04:10:09 PM »
thanks

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4808
  • Posts: 16950
  • Karma: +5270/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #17 on: July 28, 2012, 06:58:50 PM »
:android-cry:

I did this but I'm guessing I selected the wrong number in the changer because when I installed Uberoid, after removing my sd card, it reset to a black blank screen. Additionally, in a panic I tried to redownload Uberoid and therefore erased what was originally on the sd card, including the recovery file so I cannot restore my tablet to default. Can anyone help a noob please?

post your screen size please ..this is going to be difficult to assist you now without the backs ups .. post model number, screen size whatever info you have .. repost over in the version12beta2 topic area .. it doesnt belong in this thread  anymore ..post deleted 
« Last Edit: July 28, 2012, 07:01:48 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline usernameko12

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 4
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: irobot/7inches/WMT2.1_88
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #18 on: August 10, 2012, 04:47:03 PM »
um..i think i nid a help..

hirs the version of my irobot

7" touch screen via wm8650 google android 2.2 wi-fi webcam 3G epad

and first thing ive done is..

i try to locate the model of my epad using the changer.bat

and found 3 model that relate to my epad..

after applying the first one..

i says error cannot locate u boot...(i cant really remember the exact word)

then i tried the 2nd and 3rd rom but still it's says error cannot locate u boot..

i then tried another option and thats the uberoidtool...

after that my epad wont boot anything..

no text or boot animation appearing after i opened it..

lastly

is it broken or not?or maybe i can stil fixed it??

sorry for the bad english..hopefully someone will considered this..thanks and gonna wait for your help..

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4808
  • Posts: 16950
  • Karma: +5270/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #19 on: August 10, 2012, 05:50:23 PM »
um..i think i nid a help..

hirs the version of my irobot

7" touch screen via wm8650 google android 2.2 wi-fi webcam 3G epad

and first thing ive done is..

i try to locate the model of my epad using the changer.bat

and found 3 model that relate to my epad..

after applying the first one..

i says error cannot locate u boot...(i cant really remember the exact word)

then i tried the 2nd and 3rd rom but still it's says error cannot locate u boot..

i then tried another option and thats the uberoidtool...

after that my epad wont boot anything..

no text or boot animation appearing after i opened it..

lastly

is it broken or not?or maybe i can stil fixed it??

sorry for the bad english..hopefully someone will considered this..thanks and gonna wait for your help..

the uberoid tool shud have been the first thing you tried ..you cannot use it after bad flashes that has been stated over and over ..

start the changer ad use option 30..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline usernameko12

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 4
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: irobot/7inches/WMT2.1_88
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #20 on: August 11, 2012, 08:21:21 AM »
 thanks for the reply..

ive tried the option 30 but still no response

after putting the sd card on the tablet then

still show's nothing..i even try to wait for it to vibrate before letting go of the power button..

but it still blank..

is there any other way??? :'(

btw this is my 2nd time updating my epad to uberoid..the first one was successful and i also use the changer.bat for my first attempt..

idk why this time it wont work..

is there any other way to fixed this??

also that's the reason i didnt use the uberoid tool at my 2nd time because i know that changer.bat can do it..

and again..thanks for the reply and hoping that we can fix this..

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #21 on: August 11, 2012, 11:00:20 AM »
try turn on then pust reset button 2 times and let the battery drain .then plug in the charger on the tablet and put the sd card with the option 30. also make sure to use a 2gb sd card fully formatted to fat32.
« Last Edit: August 11, 2012, 02:34:49 PM by black_championro »
:faq:Guest:faq:

Offline usernameko12

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 4
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: irobot/7inches/WMT2.1_88
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #22 on: August 11, 2012, 03:20:39 PM »
ow..ok..i will try that but for now im gonna buy a 2gb memory card because i only use a 1gb card..thanks and gonna update you as soon as possible=)) thanks

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #23 on: August 11, 2012, 03:31:43 PM »
you can try using 1 gb card as well try with option 30 and if it doesn't work try other option.
:faq:Guest:faq:

Offline usernameko12

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 4
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: irobot/7inches/WMT2.1_88
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #24 on: August 11, 2012, 04:08:52 PM »
ok so far ive try the ff option..

1,2,7,8,9 and 30..

but still no response only green led but screen is still black..sorry for this..

hope you all gonna bare with me and hopefully still can fix this epad..

thanks for the rep..im gonna try the ff..

11,12,13,16,20,21,23,25,26,27,28,29,30,31, and 32 until ...

so wish me luck hehe..=))

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #25 on: August 11, 2012, 04:12:23 PM »
have you drain the bettery dry and then plug in the charger insert the sd card then turn on and push reset button?
:faq:Guest:faq:

Offline black_championro

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 63
  • -Received: 143
  • Posts: 490
  • Karma: +167/-4
  • Need a hand Give a hand
  • Tablet / Size / Model: 7 inch/wm8650 phone tablet/m7206a Infotmic x210/A13 Sun5I Xpad
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #26 on: August 11, 2012, 04:16:38 PM »
um..i think i nid a help..

hirs the version of my irobot

7" touch screen via wm8650 google android 2.2 wi-fi webcam 3G epad

and first thing ive done is..

i try to locate the model of my epad using the changer.bat

and found 3 model that relate to my epad..

after applying the first one..

i says error cannot locate u boot...(i cant really remember the exact word)

then i tried the 2nd and 3rd rom but still it's says error cannot locate u boot..

i then tried another option and thats the uberoidtool...

after that my epad wont boot anything..

no text or boot animation appearing after i opened it..

lastly

is it broken or not?or maybe i can stil fixed it??

sorry for the bad english..hopefully someone will considered this..thanks and gonna wait for your help..

if still can't i think you have hard brick the tablet. base on what i read on your post and hilighted
:faq:Guest:faq:

Offline dinoirl

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7"
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #27 on: August 15, 2012, 10:02:42 PM »
Possibly a really stupid question but where can I download the ROM from?  :blush:

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 315
  • -Received: 4808
  • Posts: 16950
  • Karma: +5270/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #28 on: August 15, 2012, 10:16:46 PM »
Possibly a really stupid question but where can I download the ROM from?  :blush:


the download link is a 3/4 the way down the page .. be sure and read the FAQ's
http://www.techknow.t0xic.nl/forum/index.php?topic=3125.0
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline dinoirl

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7"
Re: Tutorial How to install uberoid v12 beta2 wm8650 for dummy
« Reply #29 on: August 15, 2012, 10:30:40 PM »
Downloading now and hope to get a chance to flash it tomorrow  :)

 

Powered by EzPortal