Author Topic: Ipad 64GB Android tablet, Unknown FW/ver  (Read 2270 times)

0 Members and 1 Guest are viewing this topic.

Offline jomarx

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: MID 702
Ipad 64GB Android tablet, Unknown FW/ver
« on: April 20, 2012, 08:50:46 AM »
i'm trying to fix a friend's tablet, unfortunately, dont know much details about it (FW/ver) BUT I do know its hardware internals

WMS8105C board
WM8505+ PROCESSOR
128mb
Ipad 64GB logo at back
24 pin connector
vibrate on startup
had the 'Ipad' interface (when it was working)

Picture of motherboard :



Tried firmware :
Flytouch128M_1.9.1_v1 - Erase file system Fail
HoneyBee v2.0/VIA8505 WMT2.0_105/WMT2.1.2_105_M3_V1.0_script - hangs at setting up file system
M003T_WMT2.1.2_88_NAND_BOOT_20110324-HcH  - Erase file system Fail

And many more are being tested as we speak....

EDIT : After taking this picture, I think I killed it. Power on, green light, BUT no display, the vibrate disappeared also.....  :android-cry:
« Last Edit: April 20, 2012, 10:35:25 AM by jomarx »

Offline netomx

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Received: 7
  • Posts: 18
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: Netbook
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #1 on: April 28, 2012, 06:51:39 AM »
use the serial console located at the usb dongle

Offline damcy23

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 8
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android epad 7" m009f
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #2 on: May 21, 2012, 12:03:23 PM »
same problem here pls anyone can help for this firmware?i tried many firmware but also failed in touchscreen

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 6879
  • -Received: 2079
  • Posts: 8316
  • Karma: +3123/-99
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #3 on: May 21, 2012, 02:22:37 PM »
Hi guys,

for another member I fixed a 8505 ROM: http://www.techknow.t0xic.nl/forum/index.php?topic=2149.0

This member however never replied, he mailed me he wanted help on other ROM issues but I'm not sure this will work.

This ROM is made to match A LOT of the 9.7"/10" WM8505s out there, so you'll probably be lucky.

WARNING: TS might need recalibration!!!!

Offline damcy23

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 8
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android epad 7" m009f
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #4 on: May 22, 2012, 02:22:23 AM »
compatible for 7" inch ipad 64gb china tablet?..

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 304
  • -Received: 4657
  • Posts: 16726
  • Karma: +5117/-56
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #5 on: May 22, 2012, 02:26:42 AM »
compatible for 7" inch ipad 64gb china tablet?..

what tab do you have?  Your profile shows a m009f!  Is that the tab you are talking about ?
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline damcy23

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Received: 0
  • Posts: 8
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: android epad 7" m009f
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #6 on: May 22, 2012, 03:03:28 AM »
WMS8105C board
WM8505+ PROCESSOR
128mb
Ipad 64GB logo at back
24 pin connector
vibrate on startup

 same specs..but i tried many firmware but not working in touchscreen i tried also others but u disk error olweis

Offline HardcoreHacker

  • TechKnow Owner
  • Administrator
  • Uber Member
  • *****
  • Thank You
  • -Given: 6879
  • -Received: 2079
  • Posts: 8316
  • Karma: +3123/-99
Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #7 on: May 22, 2012, 02:03:32 PM »
compatible for 7" inch ipad 64gb china tablet?..
no:
Quote
This ROM is made to match A LOT of the 9.7"/10" models

Offline jomarx

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: MID 702
Re: Re: Ipad 64GB Android tablet, Unknown FW/ver
« Reply #8 on: September 18, 2012, 11:55:43 AM »
use the serial console located at the usb dongle

Hi netomx, any guide regarding the use of a serial cable?

Sent from my GT-N7000 using Tapatalk 2

 

Powered by EzPortal