Author Topic: m009f/m010f clone  (Read 1874 times)

0 Members and 1 Guest are viewing this topic.

Offline drizle

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: да заебал ты со своей регистрацией
m009f/m010f clone
« on: March 14, 2012, 04:56:55 PM »
I Update flash my tablet from SD.
I take off SD and reboot and it starts w/green ANDROID screen and stuck w/white letters ANDROID.
I connected usb cable, but my device is turned off. Now it does not turn. When I put on the charge, the red LED is lit. The computer does not detect a new device
your ideas....

Offline drizle

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: да заебал ты со своей регистрацией
Re: m009f/m010f clone
« Reply #1 on: March 15, 2012, 12:28:31 PM »
made a discovery: jtag contacts are in the 30 pin adapter. when I have the programmer can restore
Recommend program for firmware flash memory via jtag

Offline emacho

  • Sr. Member
  • ****
  • Thank You
  • -Given: 36
  • -Received: 118
  • Posts: 255
  • Karma: +127/-1
  • Uber-Noobie
  • Tablet / Size / Model: See signature
Re: m009f/m010f clone
« Reply #2 on: March 15, 2012, 10:28:07 PM »
If you have a true 30 pin tablet, then you want to use this guide from the FAQ forums here.

http://www.techknow.t0xic.nl/forum/index.php?topic=567.0

You can find and download the rom from one of the posts in the rom forum here or from the eken site.  Odds are you have an M009f. 

The 30 pin tablets don't use SD card method to flash the firmware.  (at least all the models we have seen so far).
Epad [Via 8650] :: m799ca && Eken M009F [Infotmic X210] ::  Wopad V7plus [vc882] :: Ployer Momo9 &&  Eken T02 [Allwinner]  ::  Asus transformer [Tegra]

Offline drizle

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Received: 0
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: да заебал ты со своей регистрацией
Re: m009f/m010f clone
« Reply #3 on: March 16, 2012, 02:47:58 PM »
The adapter 30 pin has :  gnd, rx, tx, 3p3v
it is not jtag for which purpose they serve?

 

Powered by EzPortal