Author Topic: Please can i have some help with a Lava 7" LT-7007 (Read 3016 times)

paul · « **on:** February 25, 2012, 08:41:48 PM »

I have try everything
some times i just get White/Black and gray Screen
and when i have it up and working i have
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

Lava 7" LT-7007 (looks like a big ipod
Green LED on - Red LED charging Audio black

WM8650,High-performance 800MHZ CPU+400MHZ DSP
ANDROID 2.2 operating system
Multiple language support (English, German, French and Spanish)
256MB memory
4GB Flash memory
Support for external TF card, maximum capacity of 32GB
4-Dimensional gravity sensing
7"WVGA wide-screen
800x480(16:9) resolution
WIFI:IEEE802.11b/g/n wireless network
TFT Resistive Touch Screen
24pin USB switch interface x1
Headphone x1 input
Mic x1 input
DC Jack x1 input
TF card reader
3.5mm headphone jack
High-quality stereo loud speaker
Built-in microphone
Audio file formats supported: MP2, MP3, WAV, AAC, WMA
Video file formats supported: (MPEG1/2/4,MJPG,H263)(1280x720) resolution,H264 (720x480) resolution
Photo file formats support: JPG, JPEG, BMP, and PNG
Built-in 0.3 pixels camera
9V, 1.5A power adapter
19.85cm x 12.7cm x 1.68cm
standby time: above 10 hours, Video play: 3 hours

twjordo · « **Reply #1 on:** February 25, 2012, 08:46:55 PM »

did you use uberoid tool?

paul · « **Reply #2 on:** February 25, 2012, 08:50:33 PM »

yes m8 but not at 1st i user 0p 8 (so i did not get a back up

)

twjordo · « **Reply #3 on:** February 25, 2012, 08:56:35 PM »

ok can you get the firmware for your tablet?

paul · « **Reply #4 on:** February 25, 2012, 09:06:34 PM »

i have had Universal WM8650 Uberoid v11 running but
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

and its the same out come with MIDV8-Modroid-v7
WM8650_1.3.0_HoneyCombMOD_20110510-HcH

twjordo · « **Reply #5 on:** February 25, 2012, 09:18:10 PM »

we can not fix those issues until you contact reseller and get firmware.... if you had used uberoid tool first then we could probably fix it.... and you used modroid then uberoid? or vice-versa...wth we are not a helpdesk for what you messed up in another forum although i would probably do same thing if one did not work... i do not mean to be soo harsh but you need to contact reseller and get the firmware then i would love to help you get uberoid running on your tablet.

have you searched web for your firmware? please try to locate it and then i can help you

paul · « **Reply #6 on:** February 25, 2012, 09:32:23 PM »

Thankyou i have email lava just waitin for them to come to me. i have the web page if u would to contact them and u can put the firmware in your tool..

paul · « **Reply #7 on:** February 25, 2012, 09:35:20 PM »

for got to say my usb mouse works

twjordo · « **Reply #8 on:** February 25, 2012, 09:39:20 PM »

that will not be necessary...you will need to reflash your tablet with original firmware then use the uberoid tool and then find the option that works best for you with the least amount of issues. then we can go into factory firmware and modify uberoid option with the factory firmware settings from the uberoid tool... you can go ahead and try flashing with other options in changer to locate the best option for your device...
let me give you a few tips

1) re-format between selecting options
2) stay with options that are as close as possible to your tablets description...i.e. screen size
3) allow honeycombs to "roll" for 15 minutes before giving up on an option
4) be sure charger is plugged up while flashing different options...power failure while flashing could brick your tablet

twjordo · « **Reply #9 on:** February 25, 2012, 09:40:45 PM »

we might be able to use usb mouse to calibrate and get ts to work... we will have to wait and see...go ahead and do some testing with other options as i have suggested and let me know how it goes

added *** if it was just touchscreen issue we could probably modify it --- my concern is that the "hard" buttons are not functional... locate an option that gives you "hard" button functions

paul · « **Reply #10 on:** February 25, 2012, 10:16:11 PM »

touchscreen will do for now as eveything is on the screen as well

twjordo · « **Reply #11 on:** February 25, 2012, 10:23:26 PM »

do you have functional "hard" buttons...i.e. volume +/- and back/home

paul · « **Reply #12 on:** February 25, 2012, 10:39:20 PM »

yes m8 but not working ( pic here http://lavaaccessories.co.uk/product-lava-tablet.html ) am sorry if link not allowed.
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

but i can user them on the screen if the touchscreen was working has they work when i use my mouse.

paul · « **Reply #13 on:** February 25, 2012, 10:48:30 PM »

have just found the same pic and its says Model Number: m009, But on my box its says LT-7007

i just try op 1 moo9s and just got a White/Black Screen

twjordo · « **Reply #14 on:** February 25, 2012, 10:55:00 PM »

yes all these tablets are very close in fact almost identical on the exterior.... you will need to try all the available options in changer for your device and locate the one that gives you "hard" buttons functionality and we can probably modify the touch settings to make it work without factory firmware but it will be a bit of "guesswork"

satcomranger · « **Reply #15 on:** February 25, 2012, 11:01:45 PM »

Quote from: paul on February 25, 2012, 10:48:30 PM

have just found the same pic and its says Model Number: m009, But on my box its says LT-7007

i just try op 1 moo9s and just got a White/Black Screen

pictures mean nothing with these tabs ..

If you start the changer.bat type in the word find
use serach term of m009

you will find 5 or 6 different version of the m009 .. trial and eror time like twjordo said ..

satcomranger · « **Reply #16 on:** February 25, 2012, 11:19:29 PM »

Quote from: paul on February 25, 2012, 11:11:00 PM

when i use the uberoidtool i need to add and replace env and wmt_scriptcmd from the M7001-China-ePad-VIA-WM8650 just to load it up

What?

what are u doing with the uberoid tool? You use that for your first flash only ... and you have already said you didn't use it for the first flash ...

paul · « **Reply #17 on:** February 25, 2012, 11:27:49 PM »

no thats right i try op 8 and it give me a White/Black Screen then i use the uberoid tool it did not boot then i found then env and wmt_scriptcmd from the M7001-China-ePad-VIA-WM8650 and replace them

satcomranger · « **Reply #18 on:** February 25, 2012, 11:34:05 PM »

the uberoid tool is now only reading files from your tab that have incorrect flash information.. what prompted u to use M7001-China-ePad-VIA-WM8650?????

paul · « **Reply #19 on:** February 25, 2012, 11:40:07 PM »

i just saw on a forum that they was the only files loading Chinacrap up.

twjordo · « **Reply #20 on:** February 25, 2012, 11:45:50 PM »

please leave what you learn in other forums in those forums when you come to techknow... we are trying to help you but it is very confusing and difficult when you are off experimenting with other forums ideas.

please locate an option... well i am getting tired of typn same thing again here

Quote from: twjordo on February 25, 2012, 10:55:00 PM

yes all these tablets are very close in fact almost identical on the exterior.... you will need to try all the available options in changer for your device and locate the one that gives you "hard" buttons functionality and we can probably modify the touch settings to make it work without factory firmware but it will be a bit of "guesswork"

paul · « **Reply #21 on:** February 25, 2012, 11:50:02 PM »

help with touch settings please.

twjordo · « **Reply #22 on:** February 25, 2012, 11:52:43 PM »

http://www.techknow.t0xic.nl/forum/index.php?topic=174.msg434#msg434 touch fix from the awesome faq's

satcomranger · « **Reply #23 on:** February 25, 2012, 11:53:59 PM »

do a new flash with option 30 ... we will go from there .. like we have said over and over and over since you did not back up files at the beginning with the tool IT IS NOW TRIAL AND ERROR ..

paul · « **Reply #24 on:** February 26, 2012, 12:21:11 AM »

option 30 give me a White Screen m8

satcomranger · « **Reply #25 on:** February 26, 2012, 12:30:19 AM »

well keep going next try option 2 .. you will have to try ALL of the options for your screen size. AND USE ONLY options for your screen size .. ie do not use options for 8, 9.7, 10, 10.1 inch screens

or

Get the original rom from your supplier !

paul · « **Reply #26 on:** February 26, 2012, 12:57:48 AM »

i just use option 30 again and put them 2 files from M7001-China and its now install i will let u know if its works

its loaded up but the same
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

i have added the 2 files as a attacment i had to use

satcomranger · « **Reply #27 on:** February 26, 2012, 01:26:29 AM »

Quote from: paul on February 26, 2012, 12:57:48 AM

i just use option 30 again and put them 2 files from M7001-China and its now install i will let u know if its works

its loaded up but the same
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

i have added the 2 files as a attacment i had to use

if you are unwilling to try and attempt flashing different options from the uberoid changer without using files from some other rom that we have no idea what it is for .. then we are done here ..

if your touch, and all hardware buttons are not working, then using those files have really accomplished nothing except to get something on your screen ..

our final recommendation is for you to get the rom from your seller .. I am locking this thread ..

twjordo · « **Reply #28 on:** February 26, 2012, 11:28:25 PM »

Quote from: satcomranger on February 26, 2012, 01:26:29 AM

Quote from: paul on February 26, 2012, 12:57:48 AM
i just use option 30 again and put them 2 files from M7001-China and its now install i will let u know if its works

its loaded up but the same
Touch not working
Home Button not working
Menu Button not working
Vol Button not working

i have added the 2 files as a attacment i had to use

if you are unwilling to try and attempt flashing different options from the uberoid changer without using files from some other rom that we have no idea what it is for .. then we are done here ..

if your touch, and all hardware buttons are not working, then using those files have really accomplished nothing except to get something on your screen ..

our final recommendation is for you to get the rom from your seller .. I am locking this thread ..

i left topic locked for almost 24 hours and just unlocked it.... maybe paul will have somthing interesting to say and will follow instructions that are given to him.... if paul does not follow instructions and continues to post as he has in the past he will be banned from techknow forum.

moderators here at techknow are volunteers and do not need members to waste our time with other forum suggestions... and if members ask for advice and continue to post same issue without implementing advice given by moderators then they should be banned from techknow forum.

techknow forum is not nor has it ever been a "help desk" for other roms... techknow forum is here for the continued development and support of the uberoid rom developed by HcH.

wossandroidthen · « **Reply #29 on:** March 15, 2012, 05:57:12 PM »

Guys
just got myself one of these Lava 7" LT-7007 tablets. Used Uberoidtool to back it up, but havent installed Uberoid yet. Can i suuply any info to help decide which option will be best suited ?